I downloaded Creo 3.0 student version, the first day i made some parts saved them and it work good, 2nd and 3rd day when making parts it would automatically close on me without any reason. would open the Creo and file restore, but when i try to save my work it would go off on me again and again.
I also wanted to know if with this 3.0 student version, can i do stress analysis and mechanical analysis? as for i need it for school projects.
can anyone help
Thank you
After finally installing Creo 3.0 Student Version , 64 bit, I am getting error (in std.out file):
License request failed for feature
ERROR - C:\Program Files\PTC\Creo 3.0\M030\Common Files\text\config.pro, linenum 5 : Keyword 'ALLOW_SAVE_FAILED_MODELS' is not valid.
Please help. Installation has not been easy!!!
Quick Installation Guide
For those looking for a quick guide to get Creo going as soon as possible and are confident in their technical ability, please follow the link below.
Academic Edition (Requires product code)
Install Videos
For those looking for an in-depth video guide, use the series of links below.
If you have problems during the installation please do no hesitate to get in contact with us here on the community page or submit a support request.
after crash of my old os i re installed it. but now cre o is not installing? it say stop working of file. main setup file is corrupt???
my name is Nilesh Rajput.
Reply as soon as possible...
How can i fix that
I am a mentor for FRC Team 2877 - The Ligerbots, and one of my tasks is to build our Creo skill base over the summer to put us in a better position for the next build season.
I have two nominally identical machines - Dell Optiplex 9020 with Intel graphics, running Windows 7 64 bit, purchased at the same time, identical hardware and nominally identical update history, similar software installed. I have verified that the graphics driver version is the same on both machines and that both installed Windows updates recently. We installed Creo 2.0 (M070) on one of them during build season (late January/early Feb) and the install went smoothly and everything ran fine (and continues to run well). Today I installed Creo 2.0 on the other one, and it wouldn't start up (gives a fatal error message). We had seen this before on other machines, so I created a config.pro file with the line "graphics win32_gdi". This allows it to start up as expected. Once it's running, I can set the graphics to opengl (using file->options->configuration editor), and it continues to run, and I can restore the last session and it will set the graphics to opengl and run OK, but I can't start it without the config.pro file that sets it to win32_gdi. The current version is M100.
I have three questions.
(1) Could this be a difference in the Creo builds? Can anyone suggest any other reason that the two systems would behave differently - other drivers, registry keys, etc?
(2) I see no difference in performance, but I only opened simple parts and assemblies. Is there a downside to using win32_gdi?
(3) Should I worry that Creo 3.0 won't run at all on these machines?
Thanks,
Noa Rensing
FRC Team 2877 - Ligerbots
We used PTC Creo 3.0 last year for FTC for robot design in our summer camp. In the fall the students used Solidworks to design parts for 3D printing. This summer camp we want to focus on 3D modeling for printing. Watched some older tutorials on PTC Creo Elements/Direct Modeling Express 6.0 and looks impressive. Separate download and free. Wanted to understand if their is an equivalent software tool in the download of PTC Creo and how does it compare to Direct Modeling Express 6.0
Hi there!!,
I am using PTC CREO 3.0(Academic Student Version) for my SAE Design competition. Im working on modeling the super frame chassis for my Roll Cage, Im using Advanced Frame work option to complete my drawing, but Im facing a problem that my AFX LITE has a limit to 20 elements in that session, So I am unable to complete my drawing , I request you to give me an valuable idea to complete my drawing with the Help of AFX. Please give me an Idea to get the full Version of Advanced Frame Work
I'm a student using Creo 2.0, and have had this program for months without any issues and then all of a sudden I get an error upon oppening Creo:
"License request failed for feature"
I attatched a picture of the full error message.
I don't know if it's an expired license or what. I thought I read that the student licenses never expired? I'm not sure, but thanks in advance!
After finally installing Creo 3.0 Student Version , 64 bit, I am getting error (in std.out file):
License request failed for feature
ERROR - C:\Program Files\PTC\Creo 3.0\M030\Common Files\text\config.pro, linenum 5 : Keyword 'ALLOW_SAVE_FAILED_MODELS' is not valid.
Please help. Installation has not been easy!!!
Some customers are seeing the following message when installing Mathcad:
Mathcad PDSi viewable support: Setup has detected that you already have a more functional product installed. Setup will now terminate.
Mathcad is trying to install an Adobe driver but a more recent version of the driver is already on your computer.
You can ignore the message and continue with the installation. This has no impact on Mathcad.
When I try to run Creo I get a message saying "License request failed for feature".
I am a student at the University of Minnesota, I downloaded the software for free from the college of science and engineering website.
How do I reactivate my license or get a new one?
Hi All,
Our licence pack appears to have expired for our Creo 2 schools software program.
The LMTools diagnostic report is as follows:
This license cannot be checked out because:
Feature has expired.
Feature: CREOPMA_Academic2
Expire date: 09-may-2015
License path: C:\Program Files\flexnet\licensing\license.dat;
FLEXnet Licensing error:-10,32
For further information, refer to the FLEXnet Licensing End User Guide,
available at www.macrovision.com.
How do we go about a new licence for our school server.
Many thanks
Paul
Hi, I tried to launch Creo Parametric 2.0 student version after i downloaded, but i encountered a fatal error.
The system says: "Fatal error encountered. A traceback has been written to C:\Users\Public\Decouments\traceback.log Please send it to Technical Support."
Does anybody know how to solve this problem?
Thanks
Hi there, I've been having a big problem trying to open creo on my laptop. I managed to install creo without a hassle, however when I try to open it, a window suddenly pops up that says:
Please help? i've tried re-installing Creo but this error still occurs.
My laptop Model: Inspiron 7520
Running on : Windows Home 7 Premium 64-bit (is it because of my operating system?)
Processor: Intel(R) Core(TM) i7-3612QM CPU @ 2.10GHz (8 CPUs), ~2.1GHz
Memory: 6144MB (6GB) RAM
If it's my operating system, do you think updating it to say Windows 8, will allow me to run Creo 2.0? Will updating it affect the fact that I have a locked license?
Any help would be much appreciated!
I am a mentor for FRC Team 2877 - The Ligerbots, and one of my tasks is to build our Creo skill base over the summer to put us in a better position for the next build season.
I have two nominally identical machines - Dell Optiplex 9020 with Intel graphics, running Windows 7 64 bit, purchased at the same time, identical hardware and nominally identical update history, similar software installed. I have verified that the graphics driver version is the same on both machines and that both installed Windows updates recently. We installed Creo 2.0 (M070) on one of them during build season (late January/early Feb) and the install went smoothly and everything ran fine (and continues to run well). Today I installed Creo 2.0 on the other one, and it wouldn't start up (gives a fatal error message). We had seen this before on other machines, so I created a config.pro file with the line "graphics win32_gdi". This allows it to start up as expected. Once it's running, I can set the graphics to opengl (using file->options->configuration editor), and it continues to run, and I can restore the last session and it will set the graphics to opengl and run OK, but I can't start it without the config.pro file that sets it to win32_gdi. The current version is M100.
I have three questions.
(1) Could this be a difference in the Creo builds? Can anyone suggest any other reason that the two systems would behave differently - other drivers, registry keys, etc?
(2) I see no difference in performance, but I only opened simple parts and assemblies. Is there a downside to using win32_gdi?
(3) Should I worry that Creo 3.0 won't run at all on these machines?
Thanks,
Noa Rensing
FRC Team 2877 - Ligerbots
I ve recently replaced my computer but I still want to use my creo (personal use) software for 3D priniting.
How can I have a new license?
Regards
After finally installing Creo 3.0 Student Version , 64 bit, I am getting error (in std.out file):
License request failed for feature
ERROR - C:\Program Files\PTC\Creo 3.0\M030\Common Files\text\config.pro, linenum 5 : Keyword 'ALLOW_SAVE_FAILED_MODELS' is not valid.
Please help. Installation has not been easy!!!
Some customers are seeing the following message when installing Mathcad:
Mathcad PDSi viewable support: Setup has detected that you already have a more functional product installed. Setup will now terminate.
Mathcad is trying to install an Adobe driver but a more recent version of the driver is already on your computer.
You can ignore the message and continue with the installation. This has no impact on Mathcad.
I installed Creo student edition but I get an error that it does not recognize my license