I am not being able to install the PT Creo. After the Licence Agreement when I click next the space where I have to enter the Simple Lecence Entry, it does not let me click or write anything.
Installation Problems
parametric.exe does not run after install
Help please. I have a Mac, bootcamp. My laptop should meet the system requirements. I've tried uninstall, reinstall a few times. I made sure the firewall, etc were disabled. I've added the graphic instruction text file. I've pretty much tried everything I can find on the internet and in these forums. Nothing works.
It appears my install was successful. The problem is I cannot run creo parametric, even in adminstrator mode. I get a user account control prompt asking if I want to allow the following program from an unkown publisher to make changes to the computer. Program name: parametric.exe, Publisher Unknown and file origin Hard drive on this computer. I click on Yes and the circular swirl appears as though something is going to happen. After a few seconds it just disappears and nothing happens.
What do I need to do as I have a school assignment due in a few days!
PLMS HIGH SCHOOL STUDENT CAN'T JOIN CLASS.
Every year I set up the PLMS for my high school CAD class. It takes a while to get everyone signed up and attached to my assignments but the payoff is worth it to the dedicated student.
Anyway, this year I have 2 students who I can't seem to add to my class. They have signed up correctly, but they are rejected when I try to add them.
Can someone help with this?
Here are the 2 e-mail accounts:
fodeekromah@gmail.com | ||
melissa2462210@yahoo.com |
Names are Fodee Kromah and Melissa Hernandez.
Thanks for help.
-Brett Penza
Holy Name High School
Worcester, MA
Have I installed the wrong version of Creo
Having followed the process to sign up for a student copy of Creo 2, I have installed the software as directed, however when I start the software it notes on the startup page that this is a 30-day trial copy.
The web site states that students get a one year license copy? What have I done wrong?
Simple License Entry Greyed out / License Failed
Problem Outline:
These two problems are characterized by the user being unable to succesfully input their product code into "Simple License Entry" box. It can appear as one of two possible errors...
- The "Simple License Entry" field is greyed out and the user cannot input text in the box. A screenshot of this error is shown below.
- After inputting the product code and clicking "Install Licensing" the user receives a red "License Failed!" error message.
Solution:
Both of these errors are caused because something is interferring with your ability to contact our licensing servers. This could be because of an anti-virus, admin permissions, firewall, or network issue. The guide linked below will walk you through the process of generating a license file manually and installing PTC Creo 2.0 without using the "Simple License Entry".
Where is the Creo element/pro 5.0 student version ??
Can't create new NC Assembly on Manufacturing
I'm trying to create a new NC assembly but after trying to create the new file the software does nothing. I tried opening Expert Machinist and that one opens and works, but the NC Assembly option for Manufacturing does nothing, it just stays in the same screen as when you open CREO. Any suggestion? My version is student free version, I really dont know if that could be a limitation in the software or if it should be working.
Notification that Creo Parametrics 2.0 stopped working
I recently installed the student version of Creo 2.0 and I tried to run Creo Parametrics 2.0, but I keep getting a notification from windows that Creo Parametrics 2.0 stopped working and I am forced to close the program. I am unsure why Creo Parametrics 2.0 stopped working.
Attached is the picture that I see on the screen of my laptop.
Can't Uninstall - Error: One or more files currently in use.
Hi,
I'm running windows 7 32 bit and I have the Creo 2 Student versions of Direct, Layout, Parametric, Simulate, Platform and Portmapper I downloaded several days ago. I'm trying to Uninstall through the Control Panel each one of the listed items but I keep getting the popup message: "One or more files are currently in use". I was able to uninstall the quality agent and one other item (I can't remember what it was). I've rebooted after removing the two aforementioned items but still no luck. I can't see anything running in processes that might be causing the problem. Don't see anything under services either. Any help would be greatly appreciated.
My student edition won't install.
I have been trying to install the student version of CREO 2.0 and when I try to enter the product key, a window pops up and says "PTC Installation Assistant has stopped working" and no explanation as to why. I have attached a jpeg of a screen shot. I've submitted support requests and have heard nothing. What's going on?
Simple License Entry Greyed out / License Failed
Problem Outline:
These two problems are characterized by the user being unable to succesfully input their product code into "Simple License Entry" box. It can appear as one of two possible errors...
- The "Simple License Entry" field is greyed out and the user cannot input text in the box. A screenshot of this error is shown below.
- After inputting the product code and clicking "Install Licensing" the user receives a red "License Failed!" error message.
Solution:
Both of these errors are caused because something is interferring with your ability to contact our licensing servers. This could be because of an anti-virus, admin permissions, firewall, or network issue. The guide linked below will walk you through the process of generating a license file manually and installing PTC Creo 2.0 without using the "Simple License Entry".
Creo 2.0 Student edition shut down during
Hi! I just startet studying and wanted to download Creo Parametrics 2.0 for home use, with the student licence.
During the "Licence identification" step I enter my "Product code" and get my licens in the "License Summary".
All well so far, but when I click "Next" the Installation Assistant stops working and the error message tells me that the program need to shut down.
It would be lovely to be able to work with Creo at home, please help me! Tell me if you need more informat
Isak, sweden
Pro Engineer Wildfire
I am a third year Honours student at Glasgow Caledonian University where I am doing BEng Computer Aided Mechanical Engineering.
I am looking to see if there is a free/discounted Pro-Engineer Wildfire download available or a trial version.
I have a project that will go towards my final mark and having the software at home would be very beneficial.
Thank you for your time.
Gary
Error when trying to enter license information
So when i try to enter my product SKU in order to install the license, I get a login window which i fill out with my matching PTC account that I am using for my school videos. After a couple seconds of it searching, I get a red Error code. I also tried using the Host ID method and received an error on that as well. Trying to install Creo 2.0
Creo Licencing
how to extend Creo 2.0 student licence
Creo Parametric Student Edition Installation Error
I downloaded and installed Creo and received my license file. When I launch Creo I get a message that says in order to run Creo in Tryout mode you have to enable the Quality Agent. I also had received a message about incorrect configuration for TCP IP. Creo Parametric closes and doesn't move on. I have tried to reconfigure my license and it shows that the license is valid.
Creo 2 does not open or run
Hello,
I have just installed Creo 2 and I cannot get it running at all. Specifically, clicking shortcut icons or windows start menu icons does nothing, the only confirmation that I get from my computer that i clicked those icons is that I get a little loading circle by my pointer for about a second and thats it. Nothing opens, no apps launch, no processes or services lunch, nothing. I have triend reinstalling and I have tried updating my graphics driver and neither has helped.
Thank you.
Renew High School Academic License before it expires
Our school's 150 concurrent license expires in November 2014. How do I go about renewing/extending it before the expiration date?
Thanks!
Simple License Entry Greyed out / License Failed
Problem Outline:
These two problems are characterized by the user being unable to succesfully input their product code into "Simple License Entry" box. It can appear as one of two possible errors...
- The "Simple License Entry" field is greyed out and the user cannot input text in the box. A screenshot of this error is shown below.
- After inputting the product code and clicking "Install Licensing" the user receives a red "License Failed!" error message.
Solution:
Both of these errors are caused because something is interferring with your ability to contact our licensing servers. This could be because of an anti-virus, admin permissions, firewall, or network issue. The guide linked below will walk you through the process of generating a license file manually and installing PTC Creo 2.0 without using the "Simple License Entry".
pro_material_dir and Windchill
Hallo,
Thanks to the new Windchill 10.2 Server I was able to check in a *.mtl file.
But her is my next Problem. How must I type the path at the pro_material_dir parameter in the config.pro to link my material library to the windchill folder?
I try this: pro_material_dir "https://academic.ptc.com/Windchill/Projekt/Formula_2015 - LA ERacing/Ordner/creo_bib/material"
but it didn't work.